dmesg - AMD Athlon XP 3200
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-46-generic (buildd@aatxe) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #105-Ubuntu SMP Fri Mar 1 00:08:49 UTC 2013 (Ubuntu 2.6.32-46.105-generic 2.6.32.60+drm33.26)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000005fffb000 (usable)
BIOS-e820: 000000005fffb000 - 000000005ffff000 (ACPI data)
BIOS-e820: 000000005ffff000 - 0000000060000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
DMI 2.3 present.
last_pfn = 0x5fffb max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 040000000 mask FE0000000 write-back
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 base 0F8000000 mask FFC000000 write-combining
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000f0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000005fffb000 (usable)
modified: 000000005fffb000 - 000000005ffff000 (ACPI data)
modified: 000000005ffff000 - 0000000060000000 (ACPI NVS)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ffff0000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 00c00000
init_memory_mapping: 0000000000000000-00000000377fe000
Using x86 segment limits to approximate NX protection
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
RAMDISK: 3784c000 - 37feff10
Allocated new RAMDISK: 008ea000 - 0108df10
Move RAMDISK from 000000003784c000 - 0000000037feff0f to 008ea000 - 0108df0f
ACPI: RSDP 000f5e30 00014 (v00 ASUS )
ACPI: RSDT 5fffb000 00030 (v01 ASUS A7V600-X 42302E31 MSFT 31313031)
ACPI: FACP 5fffb0b2 00074 (v01 ASUS A7V600-X 42302E31 MSFT 31313031)
ACPI: DSDT 5fffb126 03098 (v01 ASUS A7V600-X 00001000 MSFT 0100000B)
ACPI: FACS 5ffff000 00040
ACPI: BOOT 5fffb030 00028 (v01 ASUS A7V600-X 42302E31 MSFT 31313031)
ACPI: APIC 5fffb058 0005A (v01 ASUS A7V600-X 42302E31 MSFT 31313031)
ACPI: Local APIC address 0xfee00000
647MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00008000 - 0000ef00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00008e5ef8] TEXT DATA BSS ==> [0000100000 - 00008e5ef8]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [00008e6000 - 00008e9150] BRK ==> [00008e6000 - 00008e9150]
#6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#7 [00008ea000 - 000108df10] NEW RAMDISK ==> [00008ea000 - 000108df10]
#8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0005fffb
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x00000002
0: 0x00000006 -> 0x0000009f
0: 0x00000100 -> 0x0005fffb
On node 0 totalpages: 393110
free_area_init_node: node 0, pgdat c07a0800, node_mem_map c108f000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3963 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 1296 pages used for memmap
HighMem zone: 164589 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0xe408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000002000 - 0000000000006000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c2000000 s36056 r0 d21288 u4194304
pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390038
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 7864220 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000377fe:0005fffb)
Memory: 1534788k/1572844k available (4702k kernel code, 36808k reserved, 2124k data, 664k init, 663540k highmem)
virtual kernel memory layout:
fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc07ab000 - 0xc0851000 ( 664 kB)
.data : 0xc0597bd7 - 0xc07aadc8 (2124 kB)
.text : 0xc0100000 - 0xc0597bd7 (4702 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:256
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2200.077 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.15 BogoMIPS (lpj=8800308)
Security Framework initialized
AppArmor: AppArmor initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
mce: CPU supports 4 MCE banks
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 19k freed
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21849 entries in 43 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Athlon(TM) XP 3200+ stepping 00
Brought up 1 CPUs
Total of 1 processors activated (4400.15 BogoMIPS).
CPU0 attaching NULL sched-domain.
devtmpfs: initialized
regulator: core version 0.5
Time: 19:05:46 Date: 03/25/13
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf1970, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf8000000-0xfbffffff]
pci 0000:00:01.0: supports D1
pci 0000:00:0f.0: reg 10 io port: [0xd800-0xd807]
pci 0000:00:0f.0: reg 14 io port: [0xd400-0xd403]
pci 0000:00:0f.0: reg 18 io port: [0xd000-0xd007]
pci 0000:00:0f.0: reg 1c io port: [0xb800-0xb803]
pci 0000:00:0f.0: reg 20 io port: [0xb400-0xb40f]
pci 0000:00:0f.0: reg 24 io port: [0xb000-0xb0ff]
pci 0000:00:0f.1: reg 20 io port: [0xa800-0xa80f]
pci 0000:00:10.0: reg 20 io port: [0xa400-0xa41f]
pci 0000:00:10.0: supports D1 D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: reg 20 io port: [0xa000-0xa01f]
pci 0000:00:10.1: supports D1 D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: reg 20 io port: [0x9800-0x981f]
pci 0000:00:10.2: supports D1 D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
pci 0000:00:10.3: reg 20 io port: [0x9400-0x941f]
pci 0000:00:10.3: supports D1 D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
pci 0000:00:10.4: reg 10 32bit mmio: [0xf1800000-0xf18000ff]
pci 0000:00:10.4: supports D1 D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: PME# disabled
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
pci 0000:00:11.5: reg 10 io port: [0xe000-0xe0ff]
pci 0000:00:11.5: supports D1 D2
pci 0000:00:11.6: reg 10 io port: [0xe500-0xe5ff]
pci 0000:00:12.0: reg 10 io port: [0x9000-0x90ff]
pci 0000:00:12.0: reg 14 32bit mmio: [0xf1000000-0xf10000ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xf2000000-0xf2ffffff]
pci 0000:01:00.0: reg 14 32bit mmio pref: [0xf4000000-0xf7ffffff]
pci 0000:01:00.0: reg 18 32bit mmio pref: [0xf3800000-0xf387ffff]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xf37f0000-0xf37fffff]
pci 0000:00:01.0: bridge 32bit mmio: [0xf2000000-0xf36fffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xf3700000-0xf7ffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *15, disabled.
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x5fffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved
system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:02: ioport range 0xe400-0xe47f has been reserved
system 00:02: ioport range 0xe800-0xe81f has been reserved
system 00:02: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:02: iomem range 0xffb80000-0xffbfffff has been reserved
system 00:03: ioport range 0x4d0-0x4d1 has been reserved
system 00:0d: ioport range 0x290-0x297 has been reserved
system 00:0d: ioport range 0x370-0x375 has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xf2000000-0xf36fffff
pci 0000:00:01.0: PREFETCH window: 0xf3700000-0xf7ffffff
pci 0000:00:01.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 1 mem: [0xf2000000-0xf36fffff]
pci_bus 0000:01: resource 2 pref mem [0xf3700000-0xf7ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
pci 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:10.0: PCI INT A disabled
pci 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:10.1: PCI INT A disabled
pci 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:10.2: PCI INT B disabled
pci 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:10.3: PCI INT B disabled
pci 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:10.4: PCI INT C disabled
pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
pci 0000:01:00.0: Boot video device
Simple Boot Flag at 0x3a set to 0x1
cpufreq-nforce2: No nForce2 chipset.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1364238346.000:1): initialized
Trying to unpack rootfs image as initramfs...
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.13)
msgmni has been set to 1703
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
processor LNXCPU:00: registered as cooling_device0
isapnp: Scanning for PnP cards...
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
pata_acpi 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pata_acpi 0000:00:0f.1: PCI INT A disabled
Fixed MDIO Bus: probed
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 21, io mem 0xf1800000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000a400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000a000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x00009800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 21, io base 0x00009400
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.1.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
powernow-k8: Processor cpuid 6a0 not supported
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 5:389:92
rtc_cmos 00:05: setting system clock to 2013-03-25 19:05:46 UTC (1364238346)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Freeing initrd memory: 7823k freed
usb 1-2: new high speed USB device using ehci_hcd and address 3
isapnp: No Plug & Play device found
Freeing unused kernel memory: 664k freed
Write protecting the kernel text: 4704k
Write protecting the kernel read-only data: 1848k
udev: starting version 151
usb 1-2: configuration #1 chosen from 1 choice
usb 1-4: new high speed USB device using ehci_hcd and address 4
pata_via 0000:00:0f.1: version 0.3.4
pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xa800 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xa808 irq 15
sata_via 0000:00:0f.0: version 2.4
sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
sata_via 0000:00:0f.0: routed to hard irq line 0
Floppy drive(s): fd0 is 1.44M
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
scsi2 : sata_via
scsi3 : sata_via
ata3: SATA max UDMA/133 cmd 0xd800 ctl 0xd400 bmdma 0xb400 irq 20
ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xb800 bmdma 0xb408 irq 20
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
eth0: VIA Rhine II at 0xf1000000, 00:0e:a6:ac:3c:62, IRQ 23.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 4de1.
FDC 0 is a post-1991 82077
usb 1-4: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
ata1.00: 160086528 sectors, multi 16: LBA
ata1.01: ATA-5: WDC WD400BB-00CAA1, 17.07W17, max UDMA/100
ata1.01: 78165360 sectors, multi 16: LBA
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:1:0: Direct-Access ATA WDC WD400BB-00CA 17.0 PQ: 0 ANSI: 5
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
sda1 sda2 < sda5
sd 0:0:1:0: [sdb] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
sda6 sda7 sda8 sda9
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sda10 sda11 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb:
usb 2-1: new full speed USB device using uhci_hcd and address 2
sdb1 sdb2 sdb3
sd 0:0:1:0: [sdb] Attached SCSI disk
ata2.01: ATAPI: LG DVD-ROM DRD-8160B, 1.01, max UDMA/33
ata2.01: configured for UDMA/33
scsi 1:0:1:0: CD-ROM LG DVD-ROM DRD8160B 1.01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
sr 1:0:1:0: Attached scsi generic sg2 type 5
usb 2-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input4
generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1/input/input5
generic-usb 0003:046D:C52F.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:10.0-1/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
usb-storage: device scan complete
scsi 4:0:0:0: Direct-Access FUJITSU MHV2100AH 0811 PQ: 0 ANSI: 0
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: [sdc] 195371568 512-byte logical blocks: (100 GB/93.1 GiB)
sd 4:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sd 4:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1 sdc3 < sdc5 sdc6 sdc7 sdc8 >
sd 4:0:0:0: [sdc] Test WP failed, assume Write Enabled
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sd 4:0:0:0: [sdc] Attached SCSI disk
Adding 3148732k swap on /dev/sdb3. Priority:-1 extents:1 across:3148732k
udev: starting version 151
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
lp: driver loaded but no devices found
Linux agpgart interface v0.103
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb0: VGA16 VGA frame buffer device
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
EXT3 FS on sdb1, internal journal
agpgart: Detected VIA KT400/KT400A/KT600 chipset
usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10D5
usbcore: registered new interface driver usblp
agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
type=1505 audit(1364234769.527:2): operation="profile_load" pid=575 name="/sbin/dhclient3"
type=1505 audit(1364234769.527:3): operation="profile_load" pid=575 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1505 audit(1364234769.527:4): operation="profile_load" pid=575 name="/usr/lib/connman/scripts/dhclient-script"
type=1505 audit(1364234769.527:5): operation="profile_replace" pid=589 name="/sbin/dhclient3"
type=1505 audit(1364234769.527:6): operation="profile_replace" pid=589 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1505 audit(1364234769.527:7): operation="profile_replace" pid=589 name="/usr/lib/connman/scripts/dhclient-script"
type=1505 audit(1364234770.027:8): operation="profile_load" pid=716 name="/usr/share/gdm/guest-session/Xsession"
eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
type=1505 audit(1364234770.027:9): operation="profile_replace" pid=717 name="/sbin/dhclient3"
type=1505 audit(1364234770.027:10): operation="profile_replace" pid=717 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1505 audit(1364234770.027:11): operation="profile_replace" pid=717 name="/usr/lib/connman/scripts/dhclient-script"
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
ppdev: user-space parallel port driver
gameport: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x200, speed 1104kHz
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.17 Thu Apr 15 05:28:41 PDT 2010
Console: switching to colour frame buffer device 80x30
VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001)
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22
VIA 82xx Modem 0000:00:11.6: setting latency timer to 64
usb 1-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
VIA 82xx Modem 0000:00:11.6: PCI INT C disabled
VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
agpgart-via 0000:00:00.0: AGP 3.5 bridge
agpgart-via 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
nvidia 0000:01:00.0: putting AGP V2 device into 4x mode
eth0: no IPv6 routers present
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdc8, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdc7, internal journal
EXT3-fs: recovery complete.
EXT4-fs (sdc1): recovery complete
EXT3-fs: mounted filesystem with ordered data mode.
EXT4-fs (sdc1): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sdc5, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
usb 1-2: USB disconnect, address 3
usblp0: nonzero write bulk status received: -108
usblp0: removed
usb 1-2: new high speed USB device using ehci_hcd and address 5
usb 1-2: configuration #1 chosen from 1 choice
usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10D5
usb 1-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
usb 1-2: USB disconnect, address 5
usblp0: removed